SPECIFICATIONS Please give exact finished width and length when ordering an outside mount for these treatments. For inside mount, provide exact measurements of inside surfaces. Do not make any width deductions as the workroom will take a 3/8" allowance for inside mounted treatments. Please specify board return and if fabric return is desired. The finished length is the distance from the top to the bottom of the poufs. Standard balloon shades have a 2" heading. Inverted pleat and ceiling mounted balloon shades have no heading. Balloon shades are mounted on a 3/4" by 1-3/4" covered board. Balloon shades are made lined or unlined. If lining is desired we use 54" Sussex. Sheer or casement fabrics are not satisfactory for balloon shades and are subject to workroom approval. All cords are nylon, with brass pulleys. A 3/8" brass rod is placed approximately 10" up from the bottom of the finished length. Cord cleats, mounting brackets, and screws are standard. Cord locks are available upon request for no additional charge and are not recommended for widths over 48" wide. The number of poufs and ring spacing is at Wesco's discretion. Many Fancy shades made of fabric tend to sag or droop between the ring spacing. Finished length is the long point of the shade. CUSTOMER'S OWN MATERIAL
Customer's Own Material can be used on all Custom Drapery (subject to workroom approval). If the "Up, Down, Front and Back" of the fabric patterns are not specified, it will be up to the workroom's discretion. Also, specify the name, color, pattern repeat, width and source of the fabric on your order.
For Wesco window treatment terminology click here.
|
